Gang Sheet

Versatility:

Can be applied to a wide range of fabrics and materials,
including cotton, polyester, blends, leather, and even non-textile surfaces.

Durability

 Produces
high-quality, long-lasting prints that are resistant to washing, stretching,
and cracking.

Vibrant Colors

 Offers excellent
color vibrancy and accuracy, including the ability to print white on dark
fabrics.

Soft Hand Feel

 Results in a soft,
barely-there feel on the fabric, enhancing wearer comfort.

No Color Limitations:

Allows for printing full-color designs without restrictions,
including gradients and photorealistic images.

Cost-Effective for Small Runs

 Enables economical
production of small batches or even single items, making it ideal for custom
orders and print-on-demand services.

Follow these five steps to ensure your Direct-to-Film (DTF)
transfers look professionally pressed every time.

1.Preparation

Pre-pressing or pre-ironing is typically unnecessary.

Only remove moisture if you specifically desire to do so.

2. Design Positioning

Carefully align your transfer on the item.

For flat heat presses, heat-resistant tape is usually not
required.

Use heat-resistant tape for hat applications or when using
an iron.

For precise placement, consider using a DTF Alignment Ruler
Set.

3. Pressing Process

Apply medium pressure at 310°F (155°C) for 15 seconds.

Note: Excess heat, pressure, or time won't damage the
transfer but may affect the garment.

Always test first and use parchment paper or a protective
guard sheet with direct iron application.

4. Cooling and Peeling

Allow the transfer to cool until it's comfortable to touch
(15-30 seconds minimum).

Optional: Use a Fast Cool Peel Air Transfer Blower to
accelerate cooling.

Gently peel back from one corner, using your eyes to ensure
full adhesion.

Troubleshooting

If the design doesn't transfer completely:

Reapply the transfer and press again with increased pressure
and time (+5-10 seconds).

If unsuccessful, incrementally increase heat by 15°F until
you achieve the desired result.

Multiple pressings won't damage the transfer.

5. Finishing Touches

Cover the design with parchment paper or a single layer of
t-shirt material.

Press again for 15 seconds to enhance durability, soften the
design, and remove shine.

For a glossy finish, use a
protective guard sheet during the final press.      

Gang sheets must match the size of the selected product to avoid distortion or delayed delivery.

To ensure the best quality
prints for your DTF (Direct-to-Film) transfers, please follow these artwork
requirements:

File
Formats
- Preferred formats: AI, EPS, PDF, PSD, PNG (300 DPI minimum)

Color
Mode
- Use CMYK color mode for best color accuracy
- RGB files will be converted to CMYK, which may cause slight color shifts

Resolution
- Minimum 300 DPI for best quality
- For larger prints, 150 DPI may be acceptable

Artwork
Size
- Provide artwork at actual print size or larger
- Include bleed of 1/8 inch (3mm) on all sides for edge-to-edge printing

Fonts
- Convert all text to outlines/paths
- If editable text is needed, include all fonts used in the design

Line
Thickness
- Minimum line thickness: 0.5pt for positive lines
- Minimum line thickness: 1pt for reverse (knockout) lines

Gradients
and Transparencies
-Use gradients with caution, as they may not print smoothly in some areas
- Gradients need to be designed with "Halftoning" in order to create
a proper fade out gradient     effect.

Image
Tracing
- For best results with photos or complex images, use image tracing in vector
software
- Ensure traced images maintain detail and smooth edges

Special
Effects
- Avoid using effects like drop shadows or glows directly in the artwork
- If needed, these effects should be "Halftoned" to ensure that they
fade properly in design.

Color
Matching
- Provide Pantone color codes for specific color matching needs
- Be aware that exact color matching may not always be possible due to the CMYK
printing process

File
Preparation
- Keep all important design elements at least 1/4 inch (6mm) from the edge of
the design
- Group all elements of the design together
- Remove any hidden layers or unused elements from the file

Proofing
- Always review a digital proof before approving for production
- Check for color accuracy, sizing, and placement

By following these guidelines, you'll help ensure that your DTF transfers are
produced with the highest quality and accuracy. If you have any questions about
preparing your artwork, please don't hesitate to ask for assistance.

-Turn the garment inside out before washing.

-Wash in cold water.

-Dry on low heat or hang to dry.